CNC wire cutting machine system may be the site and cause abnormal sound

The cutting precision of NC WEDM is mainly affected by the accuracy of mechanical transmission. However, the diameter of wire electrode, the size of discharge gap, the size of jet of working fluid and the jet angle also affect the machining accuracy. Therefore, the online cutting process, we must take into account the impact of various factors on the process indicators, good at taking advantage of its disadvantages, to give full play to equipment performance, to achieve the best cutting results.
The abnormal sound of the cutting system of cnc wire cut edm machine price may appear in the following five parts:
1, the commutation moment, the coupling or key, then carefully find out the reason, the replacement has been loosening the amount of the key, so that the restoration of a large area with close; coupling to restore the cushion function, so that flexibility The buffer is indeed effective, these parts can not work long-term illness, otherwise it will not be repaired the consequences.
2, the foreign body in the wire sound, mostly because of small metal particles or molybdenum wire head into the wire barrel, as long as it is not within the wire barrel to adjust the balance screw off, you can run as usual, small metal particles or molybdenum wire Head will kill exhausted.
3, the abnormal noise of the gear or gear, to check whether the gear or gear has been excessive wear and tear, to be replaced in time, as a result of improper occlusion gap, to adjust its occlusion gap.
4, wire tube to take the lead screw to bear the load force caused by excessive friction or percussion noise, will soon be damaged parts, the abnormal parts of the site to carefully stop looking until exclusion.
5, take the wire motor blade or its own dynamic balance.