What are the advantages of the mirror spark machine?

The machining technology of the mirror spark machine was first applied to the processing when the tap was removed during World War II. In the future, the EDM machining target should be mainly for difficult-to-process materials, complex surfaces, etc., which are not easily achieved by traditional cutting machining. Fine processing, precision machining, narrow groove machining, deep cavity machining, etc. will become the focus of development.
Explain the seven advantages of the mirror spark machine:
First, the discharge speed, good processing results.
Second, with 10 sections of 100 parameters processing functions: After a fixed section can be automatically processed by the rough section by section.
Third, the deep hole processing function: deep hole processing, due to the difficulty of carbon, easy to coke. This feature can improve these adverse processing factors.
Fourth, a high degree of function, can be set to increase H per hit. For example: T=5 H=200 (setting) The machine raises 200mm every time it is played five times to facilitate the removal of residue.
Fifth, high precision: In combination with the traditional PID algorithm, after refining the new DPID algorithm to make the machine's trajectory smoother and more accurate than the traditional machine.
Sixth, built-in new artificial intelligence: the operation of the machine is monitored by artificial intelligence, can automatically eliminate coke, automatic alarm, automatic error correction, automatic detection of fault occurrence point.
Seven, to adapt to the size of copper processing: small copper processing servo speed, in order to facilitate the charcoal. Large copper machining decreases the servo speed and the rising servo speed gradually increases. To overcome the pressure and vacuum pumping force. This parameter is set in the "Area" setting in the parameter table.